TigTack™ Tube Clamps
For superior welds that save time and money
|
The essential tool to reduce costs and increase quality and profitability on sanitary stainless steel tube welding projects. Now available to the trade in sizes 1/4"OD through 6"OD TigTack™ Tube Clamps are the only patented tube clamps designed specifically for sanitary stainless steel tubes and fittings, read more about the advantages and benefits of TigTack™ Tube Clamps that others like you have achieved. |
||||||||||||||||||||
Here's What Others Say About TigTack™ Tube Clamps:
"On a large pharmaceutical plant job hat called for perfect welds that could stand up to the most rigorous checking by their inspector,the innovative new clamp proved a success in its first test!
The clamp helped pipe fitter welders win the wrestling match of aligning and tacking long spool pieces of hanging tube. Fitters discovered that it could also simplify and speed up the production of daily sample weldswhich the owner required to be submitted for inspection."
Dan Doherty, Editor
Job Scope
"Once you see the relatively simple design of the clamp, you realize the potential for it. There is a very definite need for this. Guys are jury-rigging allkinds of things that don't give them the results they really need. When you have a high quality firm that is doing high quality work, they really need something like this."
Gary Collie, Welding Superintendent (Retired)
Borg Mechanical
"They say, necessity is the mother of invention. The need for easy-to-operate clamps has always been there but people have been stubborn in their approach to solving this problem. The cost of labor and the material have continued to rise, and contractors need all the help thet can get. This is the "necessity" for the invention of the TigTack™ clamp. I have seen it in use and its overall impact on quality and production are dramatic. The clamp is as necessary as the orbital welding machine to the successful completion of these types of projects."
Jeff Beebe, Pipefitter
Local Union 597
"After some twenty-five years of involvement in the #A standard food industry as a hands-on pipe fitter, and then ans a project manager, I was faced with a serious cost over run. We had been the successful bidder on a large pharmaceutical job with the strictest of specifications we had ever encountered. We were not allowed by the quality control supervisor to tack without purge. We needed a way to guarantee fit and hold long sections of tubing and assemblies so we could set up in one purge and weld out these assemblies in a production line method. We began he widespread use of the TigTack™ clamp. The inspector loved it, our techs loved it, and as the bottom line bean counter, I adored it. The project was turned from a disaster to a profitable job and our reputation for quality work grew with it. I can't see how anyone can do this type of work without TigTack™ Tube Clamps."
George Beebe, Projevt Manager (Retired)
"I have had an oppurtunity to work with a mechanical contractor that utilized the TigTack™ Tube Clamps during fabrication of a major pharmaceutical facility, both in a fabrication shop and field installation environment. I must admit that my first thoughts were of extreme skepticism. I however observed these units being used and have come to the conclusion that there are some very positive attributes associated with the use of this type of clamp assembly:
Lightweight; Easy to Use; One Man Operation; Very Low Maintenance; Overall Time/Cost Savings
In my opinion the TigTack™ Tube Clamp is a very clean, repeatable solution to field manufactured vise grip type devices that tend to squeeze in two areas, possibly causing ovality, rather than a 360 degree squeeze that will reduce ovality and produces a firm stable clamping of the entire spool piece during the tacking process."
Herman Reinhold, Sr. Project Coordinator
Purity Systems
The number one advantage for using TigTack™ Tube Clamps in sanitary welding is the ability to complete a spool in place or on the bench with a single continuous purge.
